Simucube & IONI

IONI drives virtually any type of industrial servo motor including AC, Brushless DC, Brush DC, Linear servo motors and stepping motors from 5 Watt to 700 Watts. Whether the application requires position, velocity or torque operating mode, IONI handles them all out-of-the-box. Built-in motion profiler enables simple point-to-point moves as well as continuous synchronous motion tracking.

SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel or a force feedback lever. Typical SimuCUBE applications include vehicle and equipment simulators.

Official Granite Devices Reseller

Small Outside, Big Inside

IONI servo drive was made possible by building on the latest and greatest components available today. This do not only save space, but also drastically reduce number of parts to be paid and fail.

IONI is solely made out of the highest grade components from the most reputable hi-tech companies such as Texas Instruments, ST Microelectronics and Infineon.


SimuCUBE reduces number of simulator components to a bare minimum. It does not only control the force feedback motor, but also reads inputs of various controls, such as pedals, shifters and buttons.
From software point of view, everything is accessible through a standardized USB Human Interface Device (HID) protocol. On Windows®, force effects may be easily operated with the industry standard DirectInput API.

How it compares

Mates With Low voltage servo or stepping motors.
Motors AC, BLDC, DC, Linear, Stepper
Output Power 250W Passive cooling 350W Passive cooling
600W Forced Air cooling 800W Forced Air cooling
Motor Size 5-500W 20-700W
External Power Supply 5-52 VDC 5-55 VDC
Additionally an external 5 VDC logic supply required.
Note: if drive is used with IONICUBE motherboards, then 24 VDC logic supply voltage is needed instead as IONICUBE has on-board 5V regulator.
Control Modes Torque, Velocity, Position
Safe torque off 2-way, SIL2+ compliant
Protection Over-current, Short Circuit (phase to phase), I²t Motor Thermal Protection, Over & Under Voltage, Over Temperature.
Control Sources SimpleMotion V2, EtherCAT*, pulse & direction, quadrature, analog, PWM
Feedback devices Incremental encoders, SinCos encoder (16,64,and 256x Interpolation), Absolute serial encodes: BiSS B, BiSS C, SSI, AMS 5311
Supply Voltage Up to 18A Continuous Up to 25A Continuous
Dimension 69.5 x 36.5 x 6.5mm
Warranty 24 Months
Reliability MTBF: 2.99 million hours
Failure rate (all delivered units, actual statistic from 2015-2017): 0.36%
Compliance CE (LVD & EMC): EN 61800-5-1:2007, IEC 61000-6-1:2005 and IEC 61000-6-3:2006. SIL2: IEC 61800-5-2:2016-04
In order to meet EMC standard requirements, a proper installation and wiring is necessary. Refer to user guide for proper installation Here
*feature under development


Goodbye frustration, hello future! Granity makes setup and tuning of servo motor a breeze. Combined with walk-through online documentation, motors are fully configured and running in the record time.

Download Granity Software Here